The ENPO Gear Oil SAE 100, as its name suggests is an industrial gear oil meant for lubrication of industrial gearboxes especially under extreme pressures. This gear oil consists of a mineral base oil that provides an excellent viscosity temperature curve.  The base oil is doubled down with sulfur and phosphorus compound based high pressure  additives in addition to  anti corrosion and anti foam additives


Exceptional stability at extreme pressures

Anti Corrosion properties

Prevents wear and tear

Reduces friction


The ENPO GO II 150 Machine gear oil is formulated specially for high temperature and pressure applications on industrial gear boxes. The gear oil caters for heavy loads very well and is applied by either oil bath, oil mist or oil circulation methods.

API performance Level

AGMA 9005-E02 DIN 51517 CLP


Parameters Test Methods Unit Result
Density at 15 ASTM D4052 g/ml 0.880
Kinematic Viscosity at 40 ASTM D445 mm²/s 44
Kinematic Viscosity at 100 ASTM D445 mm²/s 6.6
Pour Point ASTM D6892 -27
Flash Point ASTM D92 224
Viscosity Index ASTM D2270 101
A.N. (Colorimetric) ASTM D974 mg KOH/g 0.38
FZG Gear Test, Fail Stage DIN 51354 12

The oil generation process in case of the Gear Oil II 150 starts with the selection of appropriate base oils. Mineral oils with a parrafinic character are used to provide a good viscosity temperature curve. Next, suitable additives are added, such as anti rust, anti wear additives etc.

Being an industrial gear oil, the GO II 150 is generally recommended for industrial applications only. However, it may be applicable in some residential uses as well. Make sure to consult your equipment’s user manual to make sure if the Go II 150 gear oil is right for you.

The GO II 150 is an industrial gear oil. It is not recommended to be used as an oil production lubricant. You can purchase a relevant lubricant dedicated to that purpose.

As opposed to other lubricants on the market, the GO II 150 gear oil has exceptional high temperature resistance. The special additives present in this industrial oil, form a film onto the equipment, protecting it from wear and reducing friction more effectively than other oils.

The oil generation process of GO II 150 industrial oil  is extremely efficient. We make sure that the oil is on par with all quality standards and has no drawbacks.

The GO II 150 Industrial gear oil is well equipped with various safety features, such as wear protection, friction reduction and corrosion protection. The oil effectively keep your gears safe and running smoothly.

The GO II 150 machine gear oil is manufactured for the purpose of lubricating gears. Therefore it is generally not possible to customize a pre-manufactured oil.

Product Enquiry

Scroll to Top